Carburetors & Parts

Good condition. No cracks or splits in rubber. O-ring seals are intact. Includes carb clamp bands. NOTE: These are the offset rubbers that fit the XS400 Maxim, not the XS400 Special.

Good condition. All moving parts are functioning freely. No visible scoring on slides. Inside looks quite clean but should still be cleaned inside and out before use. Finish is tarnished. Caps have surface rust. Yamaha part number: 12R-14900-00. Fits Yamaha: XS400 MAXIM 1982-83 1982-83 Yamaha XS400 Maxim...

Good condition. Needs cleaning. All connectors, adjusters, etc. are intact. All moving parts are operating freely. Caps are pitted and tarnished.

OEM twin Keihin carburetor bank. Carbs in good condition, all linkages complete and move freely. Slides move freely. These carbs have been on the shelf for a while, they will need a thorough cleaning. 1982 Honda CB450T Hawk Carb Bank

Good condition. Original OEM Yamaha used part. Rubber is soft and not cracking. Hardware has surface rust. Includes balancing port cap. Yamaha part number: 10L-13596-01-00, 10L-13586-01-00. Fits Yamaha: XV750 VIRAGO 1981-83 XV750M VIRAGO 1983 XV920 VIRAGO 1982 XV920R VIRAGO 1981 1981-83 Yamaha XV750...

Good condition. All moving parts are functioning freely. No visible scoring on slides. Inside looks reasonably clean but should still be cleaned inside and out before use. Finish is tarnished. Crome parts are peeling. Yamaha part number: 4X7-14900-01. Fits Yamaha: XV750 VIRAGO 1981-83 1981-83 Yamaha...

Good condition. All moving parts are functional. Will need a thorough cleaning inside. Finish is tarnished throughout. No scoring on the sliders. Please note the configuration of the choke actuator as there seems to be 2 versions. 1981-83 Suzuki GS650G Carburetor Bank

Good condition. Complete with no damage. All moving parts function freely. No visible scoring on the slides. Includes vacuum fuel pump. Finish is tarnished throughout. Will need a thorough cleaning before use. Honda part number: 16100-MA4-673. Fits Honda: CB750C CUSTOM 1981-82 CB750F SUPER SPORT 1982...

Fair condition. Carburetor set needs a thorough cleaning inside and out and very likely a rebuild. All moving parts are functional but very sticky from old fuel gum and varnish. Throttle cable holder bracket is missing. Chrome is poor on the caps. Yamaha part number: 15R-14900-00. Fits Yamaha: XJ750...

Good condition. Complete with no damage. Will need a good cleaning. All external moving parts are functioning freely.

Fair condition. Will need a good cleaning and possibly a rebuild. One T fuel line joint is damaged and will need replacement. The threaded hole to which the cable bracket mounts is broken. Nothing seized. Inside appears to be reasonably clean. Finish is tarnished throughout. Honda part number: 16100-460-781....

Good condition. Will need a good cleaning and possibly a rebuild. T fuel lines have been removed. Missing 4 bowl bolts. Nothing seized. Inside appears to be reasonably clean. Finish is tarnished throughout. Honda part number: 16100-460-781. Fits Honda: CB650 1981-82 CB650C 1981 CB650SC NIGHTHAWK 1982...

Good condition. Carb set is complete. Should be cleaned before use as they are old and have been sitting for a while. Caps are pitted with surface rust.

Good condition. All moving parts are free and correct. Finish is moderately tarnished. Includes intake pipes, boots, mounting bolts, and seals. Should be cleaned before use.

Good condition. No cracks or damage. Needs some clean-up. Honda part number: 17110-195-670. Fits Honda: XL80S 1980-85 1980-85 Honda XL80S Carb Mount Pipe 17110-195-670

Good condition. After-market trim that covers the area between the intake tubes. Chrome is good with some very minor blemishes. No dents. Eagle emblems are intact in very good condition. Sold as a pair. 1980-83 Honda GL1100 GL1100A GL1100I Goldwing Carburetor Trim - Pair

Good condition. After-market trim that covers the area between the intake tubes. Chrome is decent with some pitting on the upper section. No dents. Eagle emblem is intact in very good condition. 1980-83 Honda GL1100 GL1100A GL1100I Goldwing Carburetor Trim

Good condition. Original Yamaha Mikuni SU type carburetor No visible damage Carb is complete and undamaged Will need a serious cleaning/overhaul, as expected for a used carb - see pics 1980-82 Yamaha SR250 Exciter Carburetor Mikuni SU type

Good condition. Original Yamaha Mikuni carb rubber. No damage. Rubber is in good condition. Mating surface needs some cleanup. Includes clamp band. Yamaha part number: 3Y6-13586-00-00. Fits Yamaha: SR250 EXCITER 1980-82 SR250T EXCITER 1981 1980-82 Yamaha SR250 Exciter Carburetor Holder 3Y6-13586-00-...

Good condition. Carb set is complete. No scoring on sliders. All moving parts are free and functioning. Will need a thorough cleaning before use as they are old and have been sitting for a while. Caps and hardware are pitted with surface rust.

Good condition. Rubber is good with no cracks. Includes clamp bands. O-rings should be replaced for best seal.

Fair condition. All moving parts are free and correct. Finish is heavily tarnished. Chrome is peeling from the intake pipes. Intake pipe boots are good. Will need a thorough cleaning before use. 1980-81 Honda GL1100 Goldwing Carburetor Set 2

Good condition. Carburetor set needs a thorough cleaning inside and out. All moving parts are functional but sticky from idleness and old fuel gum. One cap bolt is missing. Yamaha part number: 2F3-14900-00. Fits Yamaha: XS750 1979 1979 Yamaha XS750 Carburetor Assembly 2F3-14900-00

Fair condition. Complete with no damage. Will need a good cleaning and possibly a rebuild. 1979 Honda CB650 Carburetor Bank

Good condition. Rubber is good with no cracks. Some clean-up required. Includes clamp bands with tarnished finish. Honda part number: 16211-426-000. Fits Honda: CB650 1979 1979 Honda CB650 Carb to Engine Intake Manifold Rubber Insulators - set of 4 16211-426-000

Good condition. Carburetor assembly is complete. Should be cleaned before use. All moving parts are functioning freely. All rubber parts appear to be in good condition. Honda part number: 16100-148-708. Fits Honda: PA50II HOBBIT 1978-83 1978-83 Honda PA50II Hobbit Moped Carburetor 16100-148-708

Good condition. No cracking or checking in the rubber. Rubber is still pliable. No o-ring seals. Includes band clamps. Some silver paint over-spray. 1977-79 Suzuki GS750 Engine to Carburetor Manifold Rubbers - Set of 4

Good condition. Complete. All moving parts are functioning freely. Will need to be cleaned for optimal performance.

Good condition. No cracks or damage in the rubber. Rubber is still pliable. Missing 1 band clamp. Sold as a set of 4. Honda part number: 16211-404-00. Fits Honda: CB550K FOUR 1977-78 1977-78 Honda CB550K Four Carburetor to Engine Intake Insulators - Set of 4 16211-404-000

Good condition. Needs a thourough cleaning. All connectors, adjusters, etc. are intact. All moving parts are functioning freely. No visibile scoring on the sliders.