Carburetors & Parts

Good condition. No visible damage. Missing one hose. Mikuni part number: RV11-106. Hyosung part number: 18500HP9500. Fits Hyosung: GV650 Aquila 2008 2008 Hyosung GV650 Aquila Air Valve Assembly RV11-106 18500HP9500

New old stock. New in the box. Includes mounting pin. Made in Taiwan. Part number 20-6500. Fits a variety of 1970s Yamaha and Suzuki models with Mikuni BS38 carburetors. Carburetor Float and Pin for Mikuni BS38 CV Carbs 20-6500 - NOS

Carbs are incomplete. What you see is what you get. Most of the parts are in good condition. Honda part numbers: 6102-344-690, 16101-344-690. Fits Honda: CB350G SUPER SPORT 1973 CB350K SUPER SPORT 1972 CL350 SCRAMBLER 1972-73 1972-73 Honda CB350G CB350K Super Sport CL350 Scrambler Carburetors for Parts...

Good condition. Includes carburetor mounting bolts. Finish is tarnished throughout. No cracks or damage. Needs new gasket for installation. 1973 Yamaha CT3 175 Carburetor Manifold Holder

Good condition. Carburetor assembly is complete. Should be cleaned before use. All moving parts are functioning freely. All rubber parts appear to be in good condition. Honda part number: 16100-148-708. Fits Honda: PA50II HOBBIT 1978-83 1978-83 Honda PA50II Hobbit Moped Carburetor 16100-148-708

Fair condition. Carburetor set needs a thorough cleaning inside and out and very likely a rebuild. All moving parts are functional but very sticky from old fuel gum and varnish. Throttle cable holder bracket is missing. Chrome is poor on the caps. Yamaha part number: 15R-14900-00. Fits Yamaha: XJ750...

Good condition. All moving parts are functioning freely. No visible scoring on slides. Inside looks quite clean but should still be cleaned inside and out before use. Finish is tarnished. Caps have surface rust. Yamaha part number: 12R-14900-00. Fits Yamaha: XS400 MAXIM 1982-83 1982-83 Yamaha XS400 Maxim...

Good condition. No cracks in rubber. Includes 8 clamp bands. Honda part number: 16211-MB0-000. Fits Honda: VF700C MAGNA 1984-86 VF700C SUPERMAGNA 1987 VF700F INTERCEPTOR 1984-85 VF700S SABRE 1984-85 VF750C MAGNA 1982-86 VF750C MAGNA 1988 VF750F INTERCEPTOR 1983-85 VF750S SABRE 1982-85 1982-88 Honda VF700...

Good condition. OEM Suzuki / Mikuni carb Carb is in generally good condition, no significant damage Throttle butterfly and choke slide move freely Carb will need a good cleaning, metering slide is glued stuck in old gas 1983 Suzuki GN250D Carburetor

Good condition. All moving parts are functioning freely. Inside looks reasonably clean but should still be cleaned inside and out before use. Finish is tarnished. Some pitting on the chrome arm. Some surface rust on the caps. Yamaha part number: 42G-14900-00. Fits Yamaha: XV1000 VIRAGO 1984-85 1984-85...

Good condition. No cracks or damage. All connection tabs are good. Not tested. Mitsubishi number: J9T01971. Yamaha part number: 1TA-82380-20. Fits Yamaha: XV1100 VIRAGO 1986-99 XV1100S VIRAGO 1996-98 1986-99 Yamaha XV1100 Virago Boost Sensor J9T01973 1TA-82380-20

Good condition. No visible damage. Original Yamaha intake boots Complete set of four, includes mounting bolts Some cosmetic cracking on outside surface of rubber expected from a used part (see pics) 1997 Yamaha YZF600R Thundercat Carb Manifold Rubbers Intake Boots

Good condition. Tested and working. Removed from a low milage crashed bike. No damage. Yamaha part# 5EL-85885-00-00. Fits Yamaha: XVS1100 V Star 1100 1999 XVS1100 V Star 1100 Custom 2000-2009 XVS1100 V Star 1100 Midnight Custom 2005-2009 XVS1100A V Star 1100 Classic 2000-2009 XVS1100AT V Star 1100 Silverado...

Good condition. Tested and working. Removed from a low milage crashed bike. No damage. Yamaha part# 5EL-85885-00-00. Fits Yamaha: XVS1100 V Star 1100 1999 XVS1100 V Star 1100 Custom 2000-2009 XVS1100 V Star 1100 Midnight Custom 2005-2009 XVS1100A V Star 1100 Classic 2000-2009 XVS1100AT V Star 1100 Silverado...

Fair condition. Complete other than rubber cable boot. Has been sitting for a long time. Will need cleaning and possibly re-build.

Good condition. Needle is straight. No scoring on slide. Includes spring, cap, nylon washer, slide height adjuster.

Good condition. Carburetor is complete. All moving parts are functioning freely. No visible scoring on slides. Needs cleaning. Finish is poor. 1973 Yamaha CT3 175 Carburetor

Fair condition. Carburetor set needs a rebuild and clean. Choke is sticking. One drain nozzle is broken off. 1973-74 Yamaha TX500 Carburetors 2

Good condition. Complete with no damage. 1 bolt is missing from the face plate. Will need a good cleaning and possibly a rebuild. All moving parts are free and correct. Chrome is peeling on the top covers. Kei Hin 745B. 1974-76 Honda CB360 CL360 Carburetor Bank

Fair condition. Includes 2 engine intake rubbers. Will need cleaning and rebuild. Rubber components are deteriorated. Fits 1974-1977 Suzuki GT380.

Good condition. Complete. All moving parts are functioning freely. No visible scoring on the slides. Will need a good cleaning.

Good condition. Needs a thourough cleaning. All connectors, adjusters, etc. are intact. All moving parts are functioning freely. No visibile scoring on the sliders.

Good condition. Complete. All moving parts are functioning freely. Will need to be cleaned for optimal performance.

Fair condition. Complete with no damage. Will need a good cleaning and possibly a rebuild. 1979 Honda CB650 Carburetor Bank

Fair condition. All moving parts are free and correct. Finish is heavily tarnished. Chrome is peeling from the intake pipes. Intake pipe boots are good. Will need a thorough cleaning before use. 1980-81 Honda GL1100 Goldwing Carburetor Set 2

Good condition. Rubber is good with no cracks. Includes clamp bands. O-rings should be replaced for best seal.

Good condition. Carb set is complete. No scoring on sliders. All moving parts are free and functioning. Will need a thorough cleaning before use as they are old and have been sitting for a while. Caps and hardware are pitted with surface rust.

Good condition. Original Yamaha Mikuni SU type carburetor No visible damage Carb is complete and undamaged Will need a serious cleaning/overhaul, as expected for a used carb - see pics 1980-82 Yamaha SR250 Exciter Carburetor Mikuni SU type

Good condition. All moving parts are free and correct. Finish is moderately tarnished. Includes intake pipes, boots, mounting bolts, and seals. Should be cleaned before use.

Good condition. Carb set is complete. Should be cleaned before use as they are old and have been sitting for a while. Caps are pitted with surface rust.