Handlebars

Good condition. An early version 31.8mm bar/stem clamp combo. Steel construction. Uncut. Paint is scuffed and scratched throughout. Double bolt stem clamp. Integrated cable hanger for cantilever brakes. 567mm width. 31.8mm clamp area. 25.4mm stem shaft. 1990s era. Made in Italy. 31.8mm Vintage MTB Quill...

New old stock. 22 1/2in (700mm) wide. 6 in (150mm) rise. 3/4in grip diameter. 7/8in (22mm) stem mount. Chrome is good - needs a polish. Vintage Chrome Riser Handlebar 700mm x 150mm - NOS

Good condition. Bar ends have a few minor scratches from use. 162 grams/pair. Wedge plugs and bolts are in good condition. There are some marks around the mounting bolt of the right bar end. Classic '90s anodized blue. Answer Hyper Ends Blue Anodized Bar Ends

Good condition. Uncut. A few minor scuffs. Ends are clean and round. Finish is lightly knurled. Decals are in good condition. 560mm width. 25.4mm clamp area. 176 grams. Stock handlebar from a '90s Brodie mountain bike. Brodie Aluminum Flat Handlebar 25.4mm 560mm

Good condition. Slightly used handlebar for BikeE CT, AT, and E2 rear. No rust, no damage. One piece bar and stem combo. Front and rear water bottle cage mounts - bolts included. 440mm bar width. 440mm shaft length. 28.6mm shaft OD. Bike E Recumbent Handlebar and Stem Combo

Good condition. Rear handlebar holder/mount that clamps to the frame of the BikeE E2 tandem recumbent. Anodized finish has scrapes and scratches from use. Aluminum construction. Accommodates a 34mm clamp-on handlebar. Bike E E2 Tandem Recumbent Handlebar Holder

Good condition. Bar has been repainted - paint has some chips, scratches and defects. No damage. 25mm clamp area. 22.2mm grip/lever clamp area. 500mm wide centre to centre. 105mm rise. 90mm straight section for grips - best used for a coaster bike. Steel construction. 1940s vintage. 1940s CCM Steel Touring...

New old stock. 470mm wide. 145mm rise. 22.2mm 7/8in grip diametre. 1in (25.4mm) stem mount. V crossbar. Steel construction. Black. Paint has some chips and scratches from storage. OEM on some 1980s children's BMX bikes. Riser Bar for Vintage Children's Bike Black - NOS

Good condition. Carbon Fibre construction. Some scarring on the inside of the left bend. Labels are in fair condition. 420mm width centre to centre. 26.0mm clamp area. 150mm drop. Ergonomic drop section. Recessed channels for cables. 190 grams. Made in Italy. Deda Elementi Spectrum 42cm Carbon Road Handlebar...

Excellent condition. Taperwall carbon fibre. Uncut. No damage to carbon - a few minor scuffs. Decals are in good condition. 610mm width. 25.4mm clamp area. 8 degree sweep. 164 grams.

Fair condition. 525mm wide. 210mm rise. 1in (25.4mm) stem mount section. Some scuffs, scratches, and pitting in the chrome. Chrome steel construction. Suitable for 16 inch children's bicycles. 1980s vintage. Vintage Chrome Hi-Rise Handlebar for Children's Bicycle

New old stock. 620mm wide. 180mm rise. 7/8in (22.2mm) stem mount section. Bars have a few minor scratches from storage. 455 grams. 2 piece aluminum alloy construction. 1980s vintage. Available in black or blue. Made in Italy. Italian Vintage Alloy BMX Handlebar - NOS

New old stock. 570mm wide. 200mm rise. 7/8in (22.2mm) stem mount. Bars have a few minor scratches from storage. 430grams. Aluminum alloy construction.

Good condition. A few minor scuffs and scratches. No damage. 25.4mm clamp area. 23.8mm grip/lever clamp area. 640mm wide. 60mm drop or rise. 2014 heat treated aluminum. Nitto model RM016N. Nitto RM016N Moustache Handlebar

New old stock. 455mm wide. 140mm post length. 18mm post diameter. 18mm bar diameter. Chrome is good with some minor blemishes from storage. Includes grips - dirty from storage. Includes bell. Attaches to bike with extrnal clamp. Rapido Chrome Handlebar for Vintage 12in Children's Bike - NOS

New old stock. 415mm wide. 135mm post length. 18mm post diameter. 18mm bar diameter. Chrome is good with some minor blemishes from storage. Includes wedge bolt. Rapido Chrome Handlebar for Vintage 12in Children's Bike - NOS 2

Good condition. Butted, heat treated aluminum. Uncut. A few minor scuffs. One small gouge at the left end. Some slight fading. Decals are in good condition. 560mm width. 25.4mm clamp area. 166 grams. 1990s MTB handlebar. Made in Canada or USA. RaceFace AirAlloy Handlebar 25.4mm 560mm

The Ritchey Evocurve WCS handlebar has a compact design, with redesigned drop and reach to allow you to quickly change the position of your hands on the handlebars and ensure comfort when you ride. Features: - Use: Road - Material: Triple butted 7050 Alloy - Drop: 128mm - Reach: 83mm - Width: 44cm Wet...

Good condition. Aluminum construction. No damage - some moderate scuffs and scratches. 39cm width centre to centre. 25.4mm clamp area. 140mm drop. 295 grams. Made in Japan. SR Sakae Custom Road Champion Road Handlebar

Good condition. Chrome steel construction. No damage - some minor blemishes in the chrome. 380mm width. 24mm clamp area fits some antique road stems. 140mm drop. Track bend. Unknown brand.

New old stock. Finish is excellent. NOTE: The first picture is the best representation of the colour as purples are hard to capture correctly. 31.8mm diameter throughout. 410mm wide centre to centre. 65mm forward extension centre to centre. Aluminum construction. Purple painted finish. Tange Bull Horn...

New old stock. Some light scuffs and scratches from storage. It appears Dr. Hamhands tried unsuccessfully to remove the left bar insert leaving some scratches and possibly the remains of a rivet. Carbon fibre construction. 580mm width. 31.8mm clamp area. 5 degree sweep. 135 grams. TruVativ Noir World...

New old stock. 640mm overall width. 220mm rise. 1in (25.4mm) stem mount section. V crossbar. Bars have significant scuffs and scratches throughout from storage. Steel construction. 1980s vintage. Available in red or yellow. Vintage Steel BMX V Handlebar - NOS

New old stock. 630mm wide. 200mm rise. 7/8in (22.2mm) stem mount section. Bars have scuffs and scratches throughout. Some rust spots from damp storage. Steel construction. 1980s vintage. Available in red or yellow. Vintage BMX V Handlebar Anodized Paint Finish - NOS

New old stock. 500mm wide. 180mm rise. 1in (25.4mm) stem mount section. Bars have scuffs and scratches throughout from storage. Steel construction. Hi-sweep design common on Leader MX and similar bikes. Black. 1980s Vintage BMX V Handlebar Black Hi-Sweep - NOS

Good condition. Some scuffs and scratches on the front of the bends. No other damage. 23.8mm clamp area. 22.2mm grip/lever clamp area. 525mm wide. 90mm drop or rise. Chrome steel construction. Vintage Chrome Steel Moustache Handlebar