Complete Legs

Lower legs are in fair condition. Some rust and pitting in the finish. All threads are good. Dust boots are good. Includes axle pinch bolt. Stanchion tubes are badly rusted. Internal parts, caps, and seals are good.

Fair condition. Fork tubes are straight. There is some pitting on the upper sections of the tubes above the fork clamp. There are a few very minor pits below the fork clamp. Lower legs are moderately tarnished. Seals appear to be good. Includes air caps. Includes fender and brace bolts. Honda part number:...

Good condition. Inner tubes have a few very minor blemishes above the telescoping area. Lowers are tarnished. Tubes are straight. Air valves are good. Seals need to be replaced. Includes brake hose guides. Includes fender bolts. Yamaha part numbers 3J2-23126-00, 3J2-23136-00, 3J2-23110-00. Fits Yamaha:...

Good condition. Legs are straight. Some micro pitting in the chrome. All threads are good. Needs new seals - evidence of leakage. Includes fender bolts. Some scuffs and scratches on the lower legs.

Fork tubes are in good condition with no pitting or rust. Tubes are straight. There are some minor tool-induced marks near the top of the right tube. Top caps are damaged. Seals are shot. Condition of internals is unknown. Lowers are heavily tarnished but undamaged. Includes axle clamp. Includes boot/cable...

Good condition. No damage or deformation. Inner fork tubes are clean with some very minir blemishes above the clamp area. Tubes are straight. Finish has minor scratches and scrapes. Caps are good - adjuster works but is missing the cover. Includes brace bolts. Includes axle clamps and bolts. Seals should...

Good condition. No pitting on stanchion tubes. Legs are straight. Includes axle clamps. Includes air hose. Includes fender bolts. May need seals. Honda part number: 51500-463-003, 51400-463-003. Fits Honda: GL1100 GOLDWING 1980-81 GL1100I GOLDWING INTERSTATE 1980-81 1980-81 Honda GL1100 GL1100I Goldwing...

Good condition. Fork tubes are in good condition with no pitting or rust. Tubes are straight. Lower legs are tarnished. Top caps, valves, and valve caps are good. Evidence of leakage - will need a rebuild. Includes axle clamps - left clamp is not original. Includes hose guide. Fender mounting threads...

Fair condition. There a few very minor pits on the fork tubes, the lowest being 210mm above the lower legs. Forks are straight. Forks need a rebuild - very dry inside. Fork caps have some marring on the wrench flats - cap seals are good. 35mm diameter. 845mm overall length to top of fork tubes. 460mm...