Lights

Good condition. Glass reflector is in excellent condition. Metal back has tarnished edges and the rear has been painted black. Includes 2 1/4in long bracket (overall length). Bracket is steel. Unbranded. 2 1/4in (57mm) diameter. Antique 2 1/4in Jewel Reflector Yellow

New old stock. Excellent condition. Cake style reflector. Aluminum back with wingnut. Yellow has a spring. Unbranded. 25mm diameter. Original vintage reflectors, not reproduction. Sold each. Available in red or yellow - please select from drop-down menu. Vintage 25mm Jewel Reflector Red Yellow - NOS

New old stock. Excellent condition. Gem style reflector. Aluminum back with lock washer and wingnut. Unbranded. 27mm diameter. Original vintage reflectors, not reproduction. Sold each. Available in red, yellow, or green - please select from drop-down menu. Vintage 27mm Jewel Reflector Red Yellow Green...

New old stock. Good condition. Some light scratches on the lens from storage. Aluminum back has some tarnish from age. Includes 57mm long bracket (hole centre to hole centre). Bracket is steel. Unbranded. 3 1/4in (82mm) diameter. Vintage 3 1/4in Bicycle Reflector - NOS

Fair condition. Glass bee hive lens has a crack on one side. Housing is pitted throughout. Unbranded. No bulb, socket, or wiring. 65.2mm bracket (light centre to outer hole centre). 66.5mm outer diameter. 58.9mm depth. Antique Glass Bee Hive Tail Light Housing

New old stock. Centre beehive protrusion. Sturmey Archer # BS-2516. 1 7/16in OD flange where it snaps into the light housing.

Good condition. Some minor cosmetic imperfections. Cosmetic silver paint ring is mostly worn off. Cat Eye model# 8434. Approximately 110mm overall length. Clear lens section at the top. One mounting hole below the round section. Cat Eye Vintage Tail Light Lens #8434

New old stock. Includes chrome mounting clamp with nut and bolt and wiring. Black plastic body with red lens. 6 sided lens. Light pivots on the clamp for adjustable aim. Cat Eye model number: TL-35. Approximately 40mm overall length. Cat Eye TL-35 Tail Light for Dyno Generator - NOS

New old stock. Includes chrome mounting clamp with nut and bolt and wiring. Chrome steel body with red lens. Light pivots on the clamp for adjustable aim. Approximately 40mm overall length. Round lens with centre cone. Chrome Bicycle Tail Light for Dyno Generator - NOS

New old stock in the package. Vintage combination headlight and horn with remote horn button. Includes stem mount bracket. Requires 2 C batteries. Unopened. Dorcy Cycle Products Horn-Light Headlight - NOS

New old stock. Package is damaged. Vintage combination headlight and horn with remote horn button. Includes stem mount bracket. Requires 2 C batteries. Dorcy decal on the top of the light is scuffed. Dorcy# 1-231. Dorcy Cycle Products Horn-Light Headlight - NOS #2

Good condition. There are several spots of pitting on the chrome. Lens and reflector are excellent. Includes mounting bracket with some surface rust. There is some staining on the white switch. Requires 1 D battery. 84mm diameter. 100mm depth. Made in Japan. Enwell Vintage Battery Headlight

Good condition. There is light pitting primarily on the right side of the headlight. Lens and reflector are excellent. Amber side markers light up with the main beam. Requires 2 C batteries. 84mm diameter. 100mm depth. Made in Japan. Enwell Vintage Battery Headlight with Amber Side Markers

Fair condition. Chrome is completely deteriorated - patina is awesome. No dents. Bulbs are not checked. Two-bulb high and low beam. Lens is excellent. Wiring nut is intact. 94mm headlight diameter. 125mm headlight depth. Made in Germany. Enlite High Low Beam Dyno Generator Headlight

New old stock. Convex lens with centre protrusion. Sturmey Archer # GL.572. 3 1/8in OD. Box not included unless you are buying all remaining.

Fair condition. Lots of surface rust. A few micro-dents. Bulb is not checked. Light mounts are good. Wiring is intact but likely needs to be replaced. Lens is heavily deteriorated. Reproduction replacement lenses are available here: https://www.ebay.com/itm/382732935119 100mm diameter. 70mm depth. Hawthorne...

Fair condition. Unit is not working due to corrosion in the battery compartment. Transistor radio and horn on one side, headlight on the other. No cracks or damage to the unit case. One handlebar clamp is broken and needs to be glued. Quick release lever is working properly. Some slight yellowing of...

28 bulbs. 4 switches. 2 generators - tested and working. 1 tail light. 1 modified fender light. Assortment of lenses, reflectors, light brackets, sockets, and wires. Job Lot of Vintage Bicycle Light Parts Bulbs Lenses Generators Switches

New old stock. Includes LP-C050-EBT lamp and SM-C050-BT battery case. Runs on 4 AA batteries or can be connected to a generator hub and tail light (see documents in pictures). Integrated handlebar clamp and shims. 6 volt, 2.4 watt. Shimano LP-C050 Dyno/Battery Headlight - NOS

Generator is in good condition. Headlight is in poor condition. Generator is tested and working. Chrome is good with some moderate scuffs. Release mechanism is good. One clamp bolt is significantly marred. Headlight bezel is damaged. Lens is not original. Headlight body and bracket are good. Wiring nuts...

Fair condition. Plastic lens is in good condition with minor scratches. Housing is slightly deformed around the licence plate window. Licence plate lens is loose and may not be oiginal. Wire is for demonstration purposes and clearly needs to be replaced. Unbranded. 32.4mm outer diameter. 22.1mm housing...

Good condition. Chrome is very good with some minor blamishes. One micro-dent at the right front edge. Bulbs are not checked. Two-bulb high and low beam. Lens is very good. Includes stem mount bracket with some light pitting. Wiring nut is intact. 62mm headlight diameter. 95mm headlight depth. Miller...

Good condition. Glass jewel lens is in excellent condition. Housing appears to be copper or brass. Housing has surface corrosion and paint overspray. Unbranded. 44.75mm outer diameter. 36.8mm mount hole circle. 17.25mm lens diameter. 17.25mm socket hole diameter. 39mm overall depth. Antique Mini Jewel...

Fair condition. Headlight bucket and bezel are heavily scraped and pitted. One small dent on the rear underside. Bulb is not checked. Lens has some light scratches. Includes stem mount bracket. Wiring nut is intact. 85mm headlight diameter. 105mm headlight depth. National Sanyo Dyno Generator Headli...

New old stock. Rafa Licht brand. Made in Germany. E10 threaded base. 6.0 volt. 0.5 amp. Case contains 5 boxes of 10 bulbs. Common bulb for vintage dyno and battery headlights. Bulbs are not individually tested or inspected. Rafa Licht E10 Bulbs 6V .5A Case pack of 50

New old stock. Features Raleigh Heron logo. Chrome steel. Fits 1in fork steer tube. Light mount is 30mm wide.

Good condition. Chrome has some scuffs and pitting. No dents or damage. Bulb is tested and working. Lens has some light scratches. Mounting bracket and engagement mechanism is good. Generator is tested and working. Generator drive wheel shows some wear. 47mm headlight diameter. 50mm headlight depth....

New old stock. 36 hole. Manufacture year 1978. 6 volt 3 watt generator. Chrome is good. Includes axle nuts, wiring, and wire straps. Made in England.

New old stock. 6 volt 3 watt. Chrome is excellent. Designed for use with Sturmey Archer Dynohub. Made in England.

Good condition. Headlight bucket has some scuffs and pitting. No dents. Bulb is not checked. Lens has some light scratches. Includes original mount bracket as well as the homemade one currently attached. Wiring nut is intact. 10 volt 4 watt generator is tested and working. 95mm headlight diameter. 80mm...