Saddles & Parts

Christie No.3 model circa 1895. Leather is in fair condition with some general surface wear. Leather pads are loose. Platform is stamped "THE CHRISTY PAT. 1895". Platform appears to have been painted black. Platform adges are dented in a couple of places. Frame and springs are solid with surface rust....

Leatheries women's model made in Birmingham England circa 1910. Leather is in fair condition with some wear spots and general surface wear. Rear metal badge is missing. Side logos are faintly visible. Frame and springs are solid but have a coating of surface rust. Leatheries Women's Antique Leather Bicycle...

Good condition. Standard brand, made in Germany. Molded synthetic rubber composite top. Rubber top has several small cracks and checking. Rear badge reads "STANDARD MADE IN GERMANY". Frame and springs are solid with surface corrosion. Includes 22mm diameter seatpost clamp stamped. 210mm overall width....

Lepper Primus in excellent condition. Leather is in good condition with scuffs and wear marks. Rear metal badge is intact. Side logos are in good condition. Frame is solid in clean condition. Made in Holland.

New old stock. Excellent condition. Black vinyl cover has a few small surface scuffs - see pictures. Mounting eyelets for T style seatpost and rear sissy bar. Stock seat on 1980s Leader MX and Via 20in muscle bikes. Will fit many MX style bicycles from the 1970s and 1980s. Leader MX Via Vintage Loaf...

Leatheries men's model made in Birmingham England circa 1910. Leather is somewhat deteriorated. More suitable for original restoration than actual use. Rear metal badge is intact. Side logos are faintly visible. Frame and springs are solid with surface rust. Includes 7/8in seatpost.

Dunlop Drilastic made in England circa 1950s. Drilastic was Dunlop's response to the stretch frame leather saddles of the day. Synthetic rubber composite unaffected by water. Cover is in good condition with some wear marks and scuffs. Rear badge is intact. Side logos are in good condition. Frame and...

Brooks B5N model. Leather is in good condition with some scuffs and wear marks. Lower edge is perforated for lacing. Rear metal badge is intact. Side logos are in good condition. Frame is in solid condition. Includes original post clamp stamped "Made in England". Brooks B5N Vintage Leather Saddle 2

Good condition. Leather is in good condition with moderate edge and corner wear. All rivets are intact. Rear nameplate is intact but no longer legible. Frame and springs are in good condition with no deformation. Original clamp is intact, stamped "Made in England". Embossed side label is fully legible....

Wrights W3ST model. Leather is in good condition with scuffs and wear marks. Side logos are worn but visible. Stamp reads "The Wright Saddle Company Ltd. Birmingham England". Frame is in solid and clean condition. Wrights W3ST Vintage Leather Bicycle Saddle

Leather is in good condition with scuffs and wear marks. Lower edge is perforated for lacing. Side logos are in good condition. Frame is solid condition with some chrome pitting. Appears to be a very close Brooks copy. Year unknown. Airbike Vintage Leather Bicycle Saddle

Wrights W3N model. Leather is in good condition with scuffs and wear marks. Side logos are worn but visible. "The Wright Saddle Company Ltd. Birmingham England". Frame is in solid and clean condition. Includes original post clamp stamped "Made in England". Wrights W3N Vintage Leather Saddle

Good condition. No tears or wear spot on the leather cover. Edge trim has separated along the right inside curve of the horn. Stamped "TROXEL MADE IN U.S.A." on the rear of the frame. Stamped "TROXEL ELYRIA, OHIO" on the underside of the saddle. Frame and springs are solid with some surface rust. 11.3mm...

Good condition. Unknown brand - frame is stamped "MADE IN ITALY". Vinyl top has no tears - some cosmetic scuffs and marks. Edge stitching is broken in mant spots. Bag hanger wires are intact. Frame and springs are solid and nearly free of corrosion. Includes 22mm diameter seatpost clamp stamped. 220mm...

Fair condition. Lemet brand, made in Holland. Molded synthetic rubber composite top. Rubber top has cracks and checking throughout. Rear badge reads "Lemet Made in Holland". Frame and springs are solid with some light surface corrosion. Includes 22mm diameter seatpost clamp. 215mm overall width. 255mm...

Wrights W3ST model. Leather is in good condition with scuffs and wear marks. Side logos are in good condition. "The Wright Saddle Company Ltd. Birmingham England". Frame is in solid condition with minimal surface rust. Includes original post clamp stamped "Made in England". Wrights W3ST Vintage Leather...

Good condition. One small crack in the rubber on the left rear edge. Some checking in the rubber along the back edge. Rubber top is molded to the metal base. Frame and springs are solid with some surface rust. 11.3mm diameter seatpost. 200mm overall width. 225mm overall length. Antique Rubber Tricycle...

New old stock. Later version with metal reinforcement ring. The reinforcement ring prolongs the life of the sliders by preventing cracking. Replacement seat sliders for Bike E recumbents. Fits all models of BikeE recumbents - CT, AT, E2, FX, RX. 1 set of 4 for 1 seat. Bike E Recumbent Seat Sliders -...

Good condition. No tears or damage - some light scuffs. Saddle shell and rails are in good condition. Made in Italy by Selle Italia. FEC alloy rails. Date stamped 2005. The NT1 has a wider, flatter, and more generously padded horn to accommodate for the forward position of time trial and triathlon racing....

Fair condition. Leather has several surface cracks and wear spots - no holes. Chrome corner bumpers are intact but rusty. Stamped "TROXEL MOSCOW, TENN. U.S.A." on the rear of the frame. Stamped "TROXEL MADE IN U.S.A." on the underside of the saddle. Frame and springs are solid with a coating of surface...

Brooks B5N model. Leather is in fair condition with some cracking, scuffs and wear marks. There is a large sticker mark on the top rear of the leather. Rear metal badge is intact. Side logos are worn but visible. Frame is in solid condition. Includes original post clamp stamped "Made in England". Brooks...

Brooks Standard Champion B-15 model. Leather is in fair condition with scuffs and wear marks. Rear metal badge is intact. Side logos are worn but visible. Frame is in solid condition. Includes original post clamp stamped "Made in England". Brooks Standard Champion B-15 Vintage Leather Bicycle Saddle

Good condition. 1940s Messinger with molded vinyl cover common on Schwinn and many other models of the period. Embossed logo reads "MESSINGER Made in U.S.A." Vinyl top has no tears but is heavily stained. Frame and springs are solid with surface rust. Includes 16mm diameter seatpost clamp. 240mm overall...

Fair condition. Frame only, no cover. Frame and springs are solid with a coating of surface rust. Rear spring covers are intact and good. Approximately 22mm diameter seatpost clamp. 240mm overall width. 270mm overall length. Troxel Antique Bicycle Saddle Frame

Fair condition. Leather has several surface cracks and wear spots - no holes. Chrome guard is in good condition with some surface rust. Stamped "TROXEL ELYRIA, OHIO MADE IN U.S.A." on the underside of the saddle. Stamped "TROXEL MADE IN U.S.A." on the rear of the frame. Frame and springs are solid with...

Good condition. Leather is surface cracked but not torn or rotten. Side logos are just legible. "Speedic Takahashi Saddle Manufacturing". "Speedic #170GT". Frame is in solid condition with moderate surface corrosion. TSM Speedic 170GT Vintage Leather Saddle

Good used condition. Some minor visible wear on the corners. Replacement seat sliders for Bike E recumbents. Fits all models of BikeE recumbents - CT, AT, E2, FX, RX. Includes attachment screws. 1 set of 4 for 1 seat. Bike E Recumbent Seat Sliders - Set of 4

Fair condition. Leather has several holes worn through. Unknown brand. Frame and springs are solid with a heavy coating of surface rust. Includes 16mm diameter seatpost and 25.5mm diameter frame insert. 190mm overall width. 250mm overall length. Antique Leather Bicycle Saddle with Post

The Premium Products Collage 1 Piece BMX Seat is a value packed replacement seat option. The Premium Collage BMX Seat is a padded BMX Saddle permanently mated to a 25.4mm alloy seat post. This set-up is not only lighter than a traditional seat and post, but you get both for about the same as you could...

The Snafu Fat Pivotal seat is thick foam padded seat for extra comfort. It features a durable Kevlar top cover with embroidered Snafu logo, plastic bumpers under the nose and tail section and a custom Snafu access patch. Saddle Weight is a measly 11.8 oz. This seat fits on pivotal style BMX seatposts...