Displaying results : puller

New old stock. New in the package. Shimano model # TL-FW40. Shimano part # NC34-0440. Two prong puller. Fits over axles up to 3/8in or 10mm. For removing Shimano and many other single speed freewheels. Made in Japan. Shimano TL-FW40 Single Speed Freewheel Puller - NOS

New old stock. Unpackaged. For removing pre-1985 Shimano 12-spline freewheels. Exact copy of Shimano TL-FW20 freewheel puller with good fit to the splines. Good quality puller, not a junk knockoff. Lifu 09A Pre-1985 Freewheel Puller for Shimano 12-spline Freewheels - NOS

New old stock. Cyclo #CYC1302. Dual ended freewheel puller. For removing Shimano MF Freewheels and Suntour 4-prong freewheels. Includes extension nut to hold the puller in position on the axle. Made in England. Cyclo CYC1302 Dual Freewheel Puller for Suntour 4-prong and Shimano MF Freewheels - NOS

New old stock. New in the package. For removing vintage Suntour 4-prong freewheels. Includes instruction sheet. Suntour model TA-320. Made in Japan by Maeda Industries. NOTE: It is best to use these pullers by holding in place with the bicycle axle and nut. Suntour TA-320 4-Prong Freewheel Puller - ...

New old stock. For removing pre-1985 Shimano 12-spline freewheels.

Good condition. Contact surfaces are good. Puller threads are good. Includes mounting bolt. Yamaha part# 2WY-81650-10. 1982-83 Yamaha XS400 Maxim Seca Rotor 2WY-81650-10

New old stock. Vintage Shimano 8mm crank bolts with self-pulling ring - no crank puller required to remove cranks. Includes nylon bushings. Sold as a pair. Shimano One Key Release Crank Bolts - Pair - NOS

Good condition. Contact surfaces are good. Puller threads are good. Includes mounting bolt. Yamaha part# 4H7-81650-10. Fits Yamaha: XJ650 MAXIM 1980-83 XJ650R SECA 1982 XJ700 MAXIM 1985-86 XJ750 MAXIM 1982-83 XJ750R SECA 1981-83 XJ900R SECA 1983 1980-86 Yamaha XJ650 XJ750 XJ900 Maxim Seca Rotor 4H7-...

Good condition. Wiring and block connectors are good. Lid is intact and latches properly. Locator decal is good. No cracks in the box. All fuses and the fuse puller are intact. Honda part number: 38200-MK3-005 . Fits Honda: VF750C MAGNA 1985 1985 Honda VF750C Magna Fuse Box 38200-MK3-005

Good condition. 165mm centre to centre. 9/16in pedal hole. Square taper mount. 28/38/48 tooth rings. Aluminum arm and spider with steel rings. Some moderate scuffs and tarnish on the aluminum. Some surface rust on the steel rings. Pedal threads are good. Puller threads are good. Teeth show very minimal...

New old stock. New in the box. For removing Cyclo-Pans 4-notch freewheels. The useful part of the tool is 23.6mm outer diameter and 19.8mm inner diameter, the slots are 6.6mm wide. Made in France. Cyclo Freewheel Remover for Cyclo-Pans 4-notch Freewheels - NOS